ARLIC Accessories

   
Analogue interface
ARS.002 for ARLIC

• 8 programmable analogue inputs.    
• Input grouping.    
• Multiple input operation mode.    
• Status backup on power failure.
• ARLICnet port.
• Up to 16 interfaces supported by ARLICnet.

The analogue inputs can be used to connect 0-10V control panels, 1-10V rheostats, single push buttons, up-down push buttons, presence detectors and relay contacts.

High voltage interface
ARS.001 for ARLIC

• 4 programmable H.V. (230VAC) inputs.    
• Input grouping.    
• Multiple input operation mode.    
• Status backup on power failure.
• ARLICnet port.
• Up to 16 interfaces supported by ARLICnet.

The inputs can be used to connect common motion detectors, wall mounted switches or buttons (230VAC), while it is possible to have mains voltage monitoring for emergency functions.

IR remote control
ARS.004 for ARLIC

• Remote control of 18 scenarios.    
• Selection of active zone.*    
• Up and down dimming buttons.    
• Long effective range.
• No command conflict between zones.*
• Each zone can have its own remote control.*
• OFF button.

*Not available functions in the MINI ARLIC system.

Programmer
ARS.008 for ARLIC

• ARLIC system configuration.    
• System devices setup.    
• Scenario programming.    
• Events programming.
• Emergency and panic programming.
• USB port for backup on memory stick.
• ARLICnet port.

Accessories for ARLIC

ARS.017  1-10V electronic rheostat	ARS.018 Wall motion detector	ARS.019 Ceiling motion detector	ARS.020 Presence detector	ARS.021 RJ45 ARLIC net socket	ARS.022 Wall mounted RJ45 ARLIC net socket
ARS.003 ARLICnet repeater	ARC.004 Recessed wall box for 1 gang control panels. Supplied for the control panels if needed.	ARC.005 Recessed wall box for 2 gang control panels. Supplied for the control panels if needed.	ARC.006 Plasterboard box for 1 gang control panels. Supplied for the control panels if needed.	ARC.007 Plasterboard box for 2 gang control panels. Supplied for the control panels if needed.