ACTOR 710

The ACTOR 710 is another member of the Actor family.  The Dimmer Pack is of compact and robust construction. It combines high quality and reliability.  The unit is designed for 19” rack mounting (3U high) in fixed installations or touring racks. The dimmer pack is controlled by DMX-512 (1990).  The DMX address can be selected through the four push buttons mounted on the front panel.  The display indicates the DMX address or the DMX failure.  The power supply is connected on a 5-pin CEE 5X63A heavy duty inlet. The 5-pin CEE 5X63A female connector is supplied free of charge with the dimmer. ACTOR 710 is offered with the following outlet sockets: Schuko, French, Danish, Swiss, Harting and Socapex.
       
   

ACTOR 710

• Soft start adjustable per channel.
• Preheat level adjustable per channel.
• Three selectable laws (curves) per channel: linear, incandescent, switch. Twelve preprogrammed chasers with capability of adjusting the speed and the intensity.
• On board channel control with the use of the keyboard.
• Possibility of ordering the dimmer pack with standard chokes or with 100μs rise time (at additional cost) which is recommended for high professional application.
• Programmable behaviour on DMX signal interruption (blackout or hold of last DMX address).
• Soft power up for inrush current limiting when the power is switched on.
• Suitable for controlling resistive or inductive loads, incandescent lamps and iron-core transformers to supply low voltage lamps.
• The dimmer pack is supplied with 3X40A mains switch (3x40A for ACTOR 710).  RCCB can be supplied at additional cost.
• MCB`s P+N can be supplied at additional cost.
• Twelve output led monitors.
• Three mains led monitors.
• Cooling fan controlled by an electronic temperature sensor.
• Automatic Power Control (APC) which controls the output power in case of fan failure to keep the temperature at safe levels.