JAZZ SERIES

The Dimmer Pack JAZZ 310 and JAZZ 311 have various applications and therefore they are useful tools for many different installations. They can be permanently wall mounted or tripod / truss mounted. On the front panel there are three sliders used to control each channel and a Master. There are also twelve chasers preset by the factory (Factory Chasers) with the capability of controlling the Dimmer Level, the speed (Rate) and the Fade Time. Each pack has two 9-pin D-sub connectors.
On the first connector it can be connected a six channel signal from an analogue control desk and the second connector (THROUGH) is connected to a second Jazz Dimmer. On the front panel there is also a selector switch used to select whether the unit will be controlled by channels 1-2-3 or 4-5-6. The dimmers incorporate a digital DMX 512 input and the start address can be selected from the corresponding buttons located on the front panel.

FEATURES

• The total load  should  not  exceed 3000W (13A) for JAZZ 310 and  6900W  (30A) for JAZZ 311.
• Each  dimmer channel  should  not  exceed  2300W (10A) at 230V.
• 3 sliders used to control each channel and a Master.
• Two 9-pin D-SUB connectors. The first connector (IN) is connected to an analogue control desk and the second one (Through) is connected to a second Jazz Dimmer. 
• 8-pin DIN connector is also available.
• Selector switch used to select whether the unit will be controlled by the channels 1-2-3 of the external control desk or by the channels 4-5-6.
• Digital DMX-512 input.
• The start address can be selected from the corresponding buttons located on the front panel.                                   
• For protection against overloading, the dimmer JAZZ 310 is equipped with an electronic current limiter at 13,5A.
• 12 Factory Set Chasers with capability of setting the Dimmer Rate and Fade.
• Dimensions in mm (WxHxD): 242 x 96 x 293.